Skip to main content
Single Product Page

Colour Matched Sealant

Formoa® 010

Formoa 010 is a single-component MS Polymer sealant that can be colour-matched to any colour required. It has low viscosity and high UV stability.

Colour matchable

High UV Stability

Easy to use


290ml Cartridge


Formoa® 010 Colours is a high quality, solvent free, single component joint sealant with high adhesive strength, available in any colour you require.

It has been developed for applications in a wide range of industries where an exact colour-matched seal / bond is required with no diminution in performance when exposed to extreme conditions and demanding environments. It has excellent weathering and UV resistance, high adhesion and can be used on composite, GRP / FRP, vinyl flooring material, metals, plastics, poly-coated steel, concrete, painted surfaces, flexible and rigid PVC / EPDM, etc.

Formoa® 010 Colours can be matched to any RAL / BS / Pantone / NCS reference or your specific substrate.
Sizes Available
290ml cartridge
Also available in bulk options
Colours Available
Any colour


Interior and exterior sealing applications where a high-quality colour-matched sealant is required.
Applications that require an easy-to-use and easy-to-tool-up sealant.

Key features

Silicone and isocyanate free
High UV performance
Excellent adhesion
Anti-pick properties
Straightforward application even in adverse conditions
No bubble formation within sealant
Primerless adhesion
Very easy to tool and finish
Minimal health and safety considerations
Good chemical resistance
No staining of porous materials such a natural stone, granite, marble, etc
No odour

How to use

Application Temperature:
Between 1℃ and 30℃
(Lower temperatures will increase thickness)
Surface preparation:
Clean surface to remove grease and contamination. Then apply Formoa surface activator prior to bonding and allow 10 minutes to flash off.
Method will depend on foil pack or cartridge use. If unsure on the correct method of application, follow your company's SOP or watch the 'How-To' video in the media section below.
Use an approved soapy solution before the skin over time.




MS polymer stands for Modified Silane Polymer. It's a type of sealant that combines the best properties of both silicone and polyurethane sealants. It offers excellent adhesion, is UV resistant, and can be painted over.

Colour-matched sealants like Formoa 010 ensure a seamless and aesthetically pleasing finish. It's especially useful for applications where the joint or bond is visible, ensuring that the sealant doesn't detract from the appearance of the finished product. It also means you won't need to paint over the sealant.

Formoa 010 will take around 15-20 minutes to skin over and around 8 hours handling time. Factors like humidity, heat, and area of coverage will affect cure time.

Yes, one of the advantages of MS polymer sealants like Formoa 010 is that they can be painted over after curing, making it easy to integrate into your project's overall design.

Yes, Formoa 010 doesn't contain any isocyanates or harmful chemicals. There are some ingredients which can cause an allergic reaction, but this is very rare. Generally, Formoa 010 is completely harmless.


290ml Cartridge