Skip to main content
Single Product Page

High-Grab Glass Adhesive

Formoa® 055

Formoa 055 is a single-component MS Polymer adhesive. It is designed for primerless glass bonding with lower viscosity and increased cure speed.

Primerless Glass Bonding and Backfilling

High Grab and Fast Curing

No Isocyanates


600ml Foil Pack


Formoa 055 is a high-quality single-component, primerless glass bonding adhesive with high adhesive strength and excellent long-term durability. It has fast skin time and rapid strength build-up.
Sizes Available
600ml Foil Pack
Also available in bulk options
Colours Available


Ideal for applications that require a primerless glass bonding adhesive for bonding windscreens or windows.
Ideal for bonding and backfilling applications that will experience heavy movement and vibrations such as automotive, mass transportation, and most vehicles.
Replacing single component polyurethane adhesives that face isocyanate restrictions.

Key features

Fully primerless but can be used with a primer if needed
Combines high-stiffness with very high-bond strength
Quick build-up of end strength, high-shear strength after full cure
High grab to hold materials in place during cure
Does not contain isocyanates, silicone, or solvent
Flexible and elastic after cure - movement accommodation up to 20%
No bubble formation within adhesive (in high temperature and humidity applications)
Very easy to tool and finish
UV resistance
Withstands most climatic conditions

How to use

Application Temperature:
Between 1℃ and 30℃
(Lower temperatures will increase thickness)
Surface preparation:
Clean surface to remove grease and contamination. Some applications may want to use Formoa Glass Primer before bonding.
If unsure on the correct method of application, follow your company's SOP or watch the 'How-To' video in the media section below.
Use an approved soapy solution before the skin over time.



Our MS polymer adhesive, Formoa 055 has been specifically formulated to offer superior adhesion to glass surfaces. Its unique chemical composition ensures a strong and durable bond, even in challenging environments where glass substrates are involved.

No, one of the standout features of Formoa 055 is that it's primerless. This means you can achieve optimal bonding results on glass without the need for a separate priming step, simplifying the application process and reducing the possibility of operator error.

While handling strength can be achieved within a few hours, full cure times can vary based on environmental conditions and the specific product variant. Typically it will take between 24 and 48 hours for Formoa 055 to reach full cure.

Absolutely, Yes. You can bond dissimilar substrates with Formoa 055. Whilst it is designed for use with glass, Formoa 055 also bonds well to most metals, composites, and plastics.

Formoa 055 is formulated keeping user safety and environmental standards in mind. MS polymer technology is very low toxicity as it doesn't contain isocyanates or solvents. Always refer to the product's Safety Data Sheet (MSDS) for detailed information on handling, storage, and disposal.

600ml Foil Pack