Skip to main content
Single Product Page

High-Performance Adhesive Sealant

Formoa® 057

Formoa 057 is a single-component MS Polymer adhesive. It is designed for applications that require a faster-curing multi-purpose adhesive that has good bonding and sealing capabilities and is highly durable.

Fast curing

Good bond and seal capabilities

Can withstand harsh climatic conditions


290ml Cartridge

600ml Foil Pack


Formoa 057 is a single-component adhesive sealant that has excellent sealing and bonding capabilities. It is designed to have better bonding capabilities than a sealant whilst also having better sealing capabilities than most adhesives. The faster cure time and high grab helps ensure production lines can keep moving. Formoa 057 also has excellent weathering resistance to remain durable in difficult conditions. Users should note potential allergic reactions, though instances are rare.
Sizes Available
290ml Cartridge
600ml Foil Pack
Also bulk options available
Colours available


External Bonding and sealing:
For applications that require an increased performance adhesive sealant that can withstand harsh weathering conditions. Typical industries include Leisure and Commercial vehicle manufacturers, Marine, and Transportation manufacturers.
Faster curing multipurpose adhesive:
For industrial manufacturers that require a multi-purpose adhesive that is faster curing to speed up production.

Key features

Increased cure speed compared to other 1K adhesives
Good Bond and Seal capabilities
Withstands harsh climatic conditions
Doesn't contain isocyanates or silicones
Can be sanded after full cure
Good colour stability and UV resistance

How to use

Application Temperature:
Between 1℃ and 30℃
(Lower temperatures will increase thickness)
Surface preparation:
Clean surface to remove grease and contamination. Then apply Formoa surface activator prior to bonding and allow 10 minutes to flash off.
Method will depend on foil pack or cartridge use. If unsure on the correct method of application, follow your company's SOP or watch the 'How-To' video in the media section below.
Use an approved soapy solution before the skin over time.



Yes, once Formoa 057 is fully cured, it can be painted over. You can also colour-match the product to avoid the need for painting over. As there is no silicone based ingredients in Formoa 057, it will not cause paint bubbling or cracking.

Yes and no. Formoa 057 does not contain any silicone-based ingredients. Instead, it is an MS polymer-based product. However, it is the same as silicone in that you can use Formoa 057 instead of a silicone sealant. It has higher performance properties than a silicone. So if you want a cheap and cheerful product, it isn't for you.

We have extensively tested Formoa 057 in our accelerated weathering machine. It provided very strong results. Even when exposed to harsh conditions, Formoa 057 remained strong and didn't have significant colour change.

You will need to wait at least 4-6 hours before putting Formoa 063 into light operation. It will take up to 72 hours for Formoa 057 to fully cure. The max open time of 30 minutes will mean you have to put the materials in place before that time otherwise the bond may be compromised.

No, Formoa 057 isn't a structural adhesive. However, that doesn't mean you can't use it in structural applications. Due to its impressive strength performance, it is more than capable of bonding lightweight substrates in place or applications that have a large bonding area. Formoa 057 can be used as a sealant although it may be more difficult to get a good finish due to the increased viscosity.

290ml Cartridge

600ml Foil Pack