Skip to main content
Single Product Page

High-Performance Glass Adhesive

Formoa® SE2

Formoa Screen Extra 2 is a single-component MS Polymer adhesive. It is designed for primerless glass bonding with high strength, very fast curing, and very high grab.

Very high Grab

High Strength

Fast Curing


600ml Foil Pack.


Formoa Screen Extra 2 is a high performance adhesive for primerless bonding of windscreens and side glass in mass transit vehicles. It has very high initial tack and green strength and rapid strength build up.
Sizes Available
600ml Foil Pack
Also available in bulk options
Colours Available


For use in glass bonding applications in the bus, coach, automotive, rail and leisure vehicle industries.
For glass bonding in after-market applications where fast drive away times are required.
Structural elastic bonding between metal, composite, painted surfaces, and many plastics (not PE, PP or Teflon).

Key features

Quick build-up of end strength, high sheer strength after full cure
Combines high stiffness with very high bond strength
Does not contain isocyanates, silicone, or solvent
No bubble formation within adhesive
High specific adhesion
High UV resistance
Minimal health and safety considerations
High specific adhesion
Excellent long term durability
No shrinkage

How to use

Application temperature:
Beetween 1°C and 30°C
(Lower temperatures will increase thickness)
Surface preparation:
Clean surface to remove grease and contamination. Some applications may want to use Formoa Glass Primer before bonding if the glass doesn't have a frit.
Method will depend on foil pack or cartridge use. If unsure on the correct method of application, follow your company's SOP or watch the 'How-To' video in the media section below.
Use an approved soapy solution before the skin over time.




Our Hybrid polymer adhesive, Formoa SE2 has been specifically formulated to offer superior adhesion to glass surfaces. Its unique chemical composition ensures a strong and durable bond, even in challenging environments where glass substrates are involved.

No, one of the standout features of Formoa SE2 is that it's primerless. This means you can achieve optimal bonding results on glass without the need for a separate priming step, simplifying the application process and reducing the possibility of operator error.

While handling strength can be achieved within two hours, full cure times can vary based on environmental conditions and the specific product variant. Typically it will take between 24 and 48 hours for Formoa SE2 to reach full cure. However, the driveaway time can be as little as 1 hour.

Absolutely, Yes. You can bond dissimilar substrates with Formoa SE2. Whilst it is designed for use with glass, Formoa SE2 also bonds well to most metals, composites, and plastics.

Formoa SE2 is formulated keeping user safety and environmental standards in mind. Hybrid polymer technology is very low toxicity as it doesn't contain isocyanates or solvents. Always refer to the product's Safety Data Sheet (MSDS) for detailed information on handling, storage, and disposal.


600ml Foil Pack